Enabling the settings save feature (called when leaving the settings screen) only when the HARDWARE_PLATFORM is set to SMART_WATCH_PCB_RELEASE

src/W800_SDK_v1.00.10/app/app_config.h

@@ -12,13 +12,15 @@
  * @brief Defines for which platform to compile the firmware for :
  * 
  * SMART_WATCH_BREADBOARD : the smart watch dev hardware which is on a breadboard
- * SMART_WATCH_PCB : the smart watch using the PCB
+ * SMART_WATCH_PCB_DEV : the smart watch using the PCB which serves as the development platform
+ * SMART_WATCH_PCB_RELEASE : the smart watch using the PCB for every day use (production)
  * 
  */
-#define SMART_WATCH_BREADBOARD (0)
-#define SMART_WATCH_PCB (1)
+#define SMART_WATCH_BREADBOARD  (0)
+#define SMART_WATCH_PCB_DEV     (1)
+#define SMART_WATCH_PCB_RELEASE (2)
 
-#define HARDWARE_PLATFORM SMART_WATCH_PCB
+#define HARDWARE_PLATFORM SMART_WATCH_PCB_RELEASE
 
 /**
  * @brief Define which kind of logs to display :
@@ -103,6 +105,12 @@
  * @brief BLE advertised device name
  * 
  */
-#define BLE_DEVICE_NAME "MDBT42Q_W800SW"
+#if HARDWARE_PLATFORM == SMART_WATCH_BREADBOARD
+    #define BLE_DEVICE_NAME "MDBT42Q_BRDDEV"
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV
+    #define BLE_DEVICE_NAME "MDBT42Q_PCBDEV"
+#else
+    #define BLE_DEVICE_NAME "MDBT42Q_W800SW"
+#endif 
 
 #endif //APP_CONFIG_H

src/W800_SDK_v1.00.10/app/app_drivers/lcd/lcd.c

@@ -80,7 +80,7 @@ const uint8_t gc9a01_init_seq[] = {
             0x03, 0, 0xB6, 0x00, 0x00,
 #if HARDWARE_PLATFORM == SMART_WATCH_BREADBOARD
             0x02, 0, 0x36, 0x88,
-#elif HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
             0x02, 0, 0x36, 0x48,
 #endif
             0x02, 0, 0x3A, 0x55,
@@ -449,7 +449,7 @@ void lcd_orientation(LCDConfig_t *const LCDConfig, LCDOrientation_e orientation)
             break;
         default: //Is default orientation eg : 0
             mmc_sdio_driver_write_one(0x88);
-#elif HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
         case LCD_ORIENTATION_90:
             mmc_sdio_driver_write_one(0x28);
             break;

src/W800_SDK_v1.00.10/app/app_drivers/watch_peripherals/watch_peripherals.c

@@ -99,7 +99,7 @@ static void vibration_motor_timer_irq_cb(void *p)
     }    
 }
 
-#if BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == POLL_POLICY && HARDWARE_PLATFORM == SMART_WATCH_PCB
+#if BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == POLL_POLICY && (HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE)
 static uint8_t _battery_status_timer_id = WM_TIMER_ID_INVALID;
 
 static void battery_status_timer_irq_cb(void *p)
@@ -128,7 +128,7 @@ static void battery_status_timer_irq_cb(void *p)
         if(_BatteryControllerStatusChangeCb) _BatteryControllerStatusChangeCb(old_battery_status, _battery_fsm);
     }
 }
-#elif BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == INTERRUPT_POLICY && HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == INTERRUPT_POLICY && (HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE)
 static void battery_controller_irq_cb(void *p)
 {
     enum tls_io_name gpio_pin = (enum tls_io_name)p;
@@ -209,7 +209,7 @@ static void watch_peripherals_io_init(void)
     tls_gpio_cfg(BATTERY_CONTROLLER_CHARGED_STATUS, WM_GPIO_DIR_INPUT, WM_GPIO_ATTR_FLOATING);
     tls_gpio_cfg(BATTERY_CONTROLLER_CHARGING_STATUS, WM_GPIO_DIR_INPUT, WM_GPIO_ATTR_FLOATING);
 
-#if BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == INTERRUPT_POLICY && HARDWARE_PLATFORM == SMART_WATCH_PCB
+#if BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == INTERRUPT_POLICY && (HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE)
     tls_gpio_isr_register(BATTERY_CONTROLLER_CHARGED_STATUS, &(battery_controller_irq_cb), (int*) BATTERY_CONTROLLER_CHARGED_STATUS);
 	tls_gpio_irq_enable(BATTERY_CONTROLLER_CHARGED_STATUS, WM_GPIO_IRQ_TRIG_DOUBLE_EDGE); // Enabled when level is changing edge
 
@@ -262,7 +262,7 @@ void watch_peripherals_init(int8_t adcOffset)
         if(WM_TIMER_ID_INVALID == _vibration_motor_timer_id)
             APP_LOG_ERROR("Failed to create vibration motor timer");
     }
-#if BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == POLL_POLICY && HARDWARE_PLATFORM == SMART_WATCH_PCB
+#if BATTERY_CONTROLLER_STATUS_DETECTION_POLICY == POLL_POLICY && (HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE)
     if(WM_TIMER_ID_INVALID == _battery_status_timer_id)
     {
         struct tls_timer_cfg battery_status_timer_cfg = 

src/W800_SDK_v1.00.10/app/gfx/compass_screen.c

@@ -94,7 +94,7 @@ static void rotate_cardinal(CompassCardinal_t *cardinal, uint16_t azimuth)
 #if HARDWARE_PLATFORM == SMART_WATCH_BREADBOARD
     rotated_x = (float)(cardinal->position.x-120+cardinal->offset.x)*cos(azimuth_in_rads) - (float)(cardinal->position.y-120+cardinal->offset.y)*sin(azimuth_in_rads) + 120-cardinal->offset.x;
     rotated_y = (float)(cardinal->position.y-120+cardinal->offset.y)*cos(azimuth_in_rads) + (float)(cardinal->position.x-120+cardinal->offset.x)*sin(azimuth_in_rads) + 120-cardinal->offset.y;
-#elif HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
     rotated_x = (float)(cardinal->position.x-120+cardinal->offset.x)*cos(azimuth_in_rads) + (float)(cardinal->position.y-120+cardinal->offset.y)*sin(azimuth_in_rads) + 120-cardinal->offset.x;
     rotated_y = (float)(cardinal->position.y-120+cardinal->offset.y)*cos(azimuth_in_rads) - (float)(cardinal->position.x-120+cardinal->offset.x)*sin(azimuth_in_rads) + 120-cardinal->offset.y;
 #endif
@@ -151,7 +151,7 @@ void compass_screen_set_azimuth(CompassScreen_t * const compassScreen, uint16_t
     azimuth %= 360;
 #if HARDWARE_PLATFORM == SMART_WATCH_BREADBOARD
     uint16_t azimuthAdjusted = 359 - azimuth;
-#elif HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
     uint16_t azimuthAdjusted = azimuth; 
 #endif
 
@@ -182,7 +182,7 @@ void compass_screen_set_azimuth(CompassScreen_t * const compassScreen, uint16_t
     rotate_cardinal(&compassScreen->northCardinal, azimuth);
 #if HARDWARE_PLATFORM == SMART_WATCH_BREADBOARD
     lv_img_set_angle(compassScreen->northMarker, azimuth*10);
-#elif HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
     lv_img_set_angle(compassScreen->northMarker, -azimuth*10);
 #endif
     //lv_meter_set_scale_range(compassScreen->compassGraduation.meter, compassScreen->compassGraduation.scale, 0, 330, 330, azimuth-90);

src/W800_SDK_v1.00.10/app/gfx/gfx_task.c

@@ -1,3 +1,4 @@
+#include "app_config.h"
 #include "app_common.h"
 #include "app_utils.h"
 #include "lvgl.h"
@@ -386,10 +387,13 @@ static void getBMP280DataCb(float *temperature, float *pressure)
 
 static void saveSettingsToFlashCb(void)
 {
-    /*if(!persistency_save_settings_to_flash())
+    // Only enable the settings save feature if we compile in SMART_WATCH_PCB_RELEASE mode
+    #if HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
+    if(!persistency_save_settings_to_flash())
     {
         APP_LOG_ERROR("Failed to save watch settings to flash");
-    }*/
+    }
+    #endif
 }
 
 static void performFactoryResetCb()

src/W800_SDK_v1.00.10/lvgl/lvgl_port/lv_port_indev.c

@@ -152,7 +152,7 @@ static void touchpad_read(lv_indev_drv_t * indev_drv, lv_indev_data_t * data)
             data->point.x = 239-last_x;
             data->point.y = 239-last_y;
             break;
-#elif HARDWARE_PLATFORM == SMART_WATCH_PCB
+#elif HARDWARE_PLATFORM == SMART_WATCH_PCB_DEV || HARDWARE_PLATFORM == SMART_WATCH_PCB_RELEASE
         case LCD_ORIENTATION_90:
             data->point.x = last_y;
             data->point.y = 239-last_x;