README.md

@@ -22,27 +22,16 @@ Possible choices :
     * MPU6050
     * BMI160
     * LSM6DS3
-    * BMA456 <-- SELECTED i2c addr : 0x18 or 0x19 7 bit address, has the wrist tilt detection feature.
+* A magnetometer :
-* A magnetometer (possible choices):
+    * HMC5883L
-    * HMC5883L <-- SELECTED i2c addr : 0x1E 7 bit address, better soldering footprint
     * QMC5883L
     * LSM303DLHC
-    * BMM150 <-- Package with balls, hard to handle
 * An air pressure/temperature sensor (to display the altitude for example)
-    * BMP280 <-- SELECTED i2c addr : 0x76 or 0x77
+    * BMP280
 
 ## Actuators :
 * A vibration motor to notify events to the user.
 
-## Power source :
-* 1 cell lipo battery
-* A charge controller
-
-## Screen + touch element :
-* Screen with touch : STP240240_R130A1(T), SPI interface 240*240 px, ST7789V driver.
-* Touch element i2c addr : 0x46, IT7257 I2C touch driver
-
-
 ## MCU Pin assignement table :
 | Pin Number | Pin Name | Type | Function | Pull UP/DOWN| Connected to | Comment |
 |------------|----------|------|----------|-------------|--------------|---------|

documentation/Screen+touch screen resources/Driver/Display_Code_ST7789V.txt

@@ -1,102 +0,0 @@
-HW_Reset();                
-
-Delay(120);                
-
-Write(Command , 0x11);     
-
-Delay(120);                
-
-Write(Command , 0x36);     
-Write(Parameter , 0x00);   
-
-Write(Command , 0x3A);     
-Write(Parameter , 0x05);   
-
-Write(Command , 0xB2);     
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x00);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x33);   
-
-Write(Command , 0xB7);     
-Write(Parameter , 0x72);   
-
-Write(Command , 0xBB);     
-Write(Parameter , 0x3D);   //Vcom=1.625V
-
-Write(Command , 0xC2);     
-Write(Parameter , 0x01);   
-
-Write(Command , 0xC3);     
-Write(Parameter , 0x19);   //GVDD=4.8V 
-
-Write(Command , 0xC4);     
-Write(Parameter , 0x20);   //VDV, 0x20:0v
-
-Write(Command , 0xC6);     
-Write(Parameter , 0x0F);   //0x0F:60Hz        	
-
-Write(Command , 0xD0);     
-Write(Parameter , 0xA4);   
-Write(Parameter , 0xA1);   
-
-Write(Command , 0xE0);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x04);   
-Write(Parameter , 0x08);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x05);   
-Write(Parameter , 0x2A);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x29);   
-Write(Parameter , 0x2F);   
-
-Write(Command , 0xE1);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x03);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x0A);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x06);   
-Write(Parameter , 0x2B);   
-Write(Parameter , 0x34);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x12);   
-Write(Parameter , 0x14);   
-Write(Parameter , 0x28);   
-Write(Parameter , 0x2E);   
-
-
-Write(Command , 0x21); 
-
-Write(Command , 0x29);     
-
-    
-
-Write(Command , 0x2A);     //Column Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2B);     //Row Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2C);
-
-/*唤醒光圈,进入睡眠需要这样写
-Write(Command , 0x28); 
-Write(Command , 0x10); 
-Write(Command , 0xD6);     
-Write(Parameter , 0xA1); 
- */  

documentation/Screen+touch screen resources/HSD1.3+ST7789V_update.txt

@@ -1,102 +0,0 @@
-HW_Reset();                
-
-Delay(120);                
-
-Write(Command , 0x11);     
-
-Delay(120);                
-
-Write(Command , 0x36);     
-Write(Parameter , 0x00);   
-
-Write(Command , 0x3A);     
-Write(Parameter , 0x05);   
-
-Write(Command , 0xB2);     
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x00);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x33);   
-
-Write(Command , 0xB7);     
-Write(Parameter , 0x72);   
-
-Write(Command , 0xBB);     
-Write(Parameter , 0x3D);   //Vcom=1.625V
-
-Write(Command , 0xC2);     
-Write(Parameter , 0x01);   
-
-Write(Command , 0xC3);     
-Write(Parameter , 0x19);   //GVDD=4.8V 
-
-Write(Command , 0xC4);     
-Write(Parameter , 0x20);   //VDV, 0x20:0v
-
-Write(Command , 0xC6);     
-Write(Parameter , 0x0F);   //0x0F:60Hz        	
-
-Write(Command , 0xD0);     
-Write(Parameter , 0xA4);   
-Write(Parameter , 0xA1);   
-
-Write(Command , 0xE0);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x04);   
-Write(Parameter , 0x08);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x05);   
-Write(Parameter , 0x2A);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x29);   
-Write(Parameter , 0x2F);   
-
-Write(Command , 0xE1);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x03);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x0A);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x06);   
-Write(Parameter , 0x2B);   
-Write(Parameter , 0x34);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x12);   
-Write(Parameter , 0x14);   
-Write(Parameter , 0x28);   
-Write(Parameter , 0x2E);   
-
-
-Write(Command , 0x21); 
-
-Write(Command , 0x29);     
-
-    
-
-Write(Command , 0x2A);     //Column Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2B);     //Row Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2C);
-
-/*唤醒光圈,进入睡眠需要这样写
-Write(Command , 0x28); 
-Write(Command , 0x10); 
-Write(Command , 0xD6);     
-Write(Parameter , 0xA1); 
- */