Updated lvgl simulated screen files

waking up the watch by touching the screen where the second hand was
jumping from the old time to the new time

README.md

@@ -10,13 +10,20 @@ The W800 is a pretty interesting chip with impressive characteristics for its pr
 ### Core :  
 * 32bit XT804 CPU
 * 240 Mhz max clock  
+
 ### Memory :
 * 2 MB on chip flash
 * 288 KB RAM, ~130 KB available to the user
+
 ### Wireless connectivity :
 * Bluetooth EDR(Classic) and BLE 4.2
 * WiFi 2.4Ghz 802.11 b/g/n
 
+### SDK & OS
+* FreeRTOS v10.4.1
+* BLE stack : NimBLE
+* TCP IP stack : lwip v2.1.3
+
 ## Getting started :
 ### So, you'd like to try this project yourself ?
 ### Here are the steps to follow, in order to build the firmware and flash the board :
@@ -192,7 +199,7 @@ using a magnetic 4 pin plug.
 * [ ] Fix the issue with the DW01A chip, should be as easy as to replace the 100nf C12 cap with a lower value, let's say 80nf.
 ## To do - SOFTWARE
 * [X] Finish to design the settings page.
-* [ ] Implement watch settings persistency using the integrated flash memory
+* [X] Implement watch settings persistency using the integrated flash memory
 * [ ] Implement a good algorithm to handle adaptiv MCU clock 
 to save power
 * Drivers:

src/W800_SDK_v1.00.10/app/app_config.h

@@ -99,4 +99,6 @@
 #define VIBRATION_MOTOR_ENABLE      WM_IO_PB_00
 #define VIBRATION_MOTOR_PWM_CHANNEL (0)
 
+#define BLE_DEVICE_NAME "MDBT42Q_W800SW"
+
 #endif //APP_CONFIG_H

src/W800_SDK_v1.00.10/app/app_drivers/lcd/lcd.c

@@ -382,7 +382,6 @@ void lcd_set_backlight(LCDConfig_t * const LCDConfig, uint8_t brightness)
         tls_gpio_cfg(LCDConfig->LCDPWMBacklightPin, WM_GPIO_DIR_OUTPUT, WM_GPIO_ATTR_FLOATING);
         tls_gpio_write(LCDConfig->LCDPWMBacklightPin, 0);
     }
-
 }
 
 void lcd_hardware_reset(LCDConfig_t * const LCDConfig)
@@ -523,5 +522,8 @@ static void lcd_set_cs(LCDConfig_t * const LCDConfig, LCDSelect_e selected)
 
 static void lcd_set_data_command(LCDConfig_t * const LCDConfig, LCDDataCommand_e dataCommand)
 {
+    // We wait for the mmc sdio driver to be ready before changing the LCD access mode
+    mmc_sdio_driver_blocking_wait_bus_free();
+
     tls_gpio_write(LCDConfig->LCDDataCommandPin, dataCommand);
 }

src/W800_SDK_v1.00.10/app/app_drivers/mmc_sdio/mmc_sdio.c

@@ -99,7 +99,7 @@ void mmc_sdio_driver_write_dma_async(uint32_t *data, uint32_t dataLengthInBytes)
 void mmc_sdio_driver_write_one(uint8_t data)
 {
     /* Wait for MMC device to be ready to send the data */
-    while (SDIO_HOST->MMC_IO & 0x01);
+    mmc_sdio_driver_blocking_wait_bus_free();
     
     SDIO_HOST->BUF_CTL = 0x4820;
     SDIO_HOST->DATA_BUF[0] = (uint32_t)data;
@@ -107,19 +107,25 @@ void mmc_sdio_driver_write_one(uint8_t data)
     /* Start the transfer */
     SDIO_HOST->MMC_IO = 0x01;
     /* Wait for MMC device to be done sending the data */
-    while (SDIO_HOST->MMC_IO & 0x01);
+    mmc_sdio_driver_blocking_wait_bus_free();
 }
 
 void mmc_sdio_driver_write(const uint8_t *data, uint16_t dataLengthInBytes)
 {
     /* Wait for MMC device to be ready to send the data */
-    while (SDIO_HOST->MMC_IO & 0x01);
+    mmc_sdio_driver_blocking_wait_bus_free();
 
     SDIO_HOST->BUF_CTL = 0x4820;
     memcpy((void *)SDIO_HOST->DATA_BUF, (void *)data, dataLengthInBytes);
     SDIO_HOST->MMC_BYTECNTL = dataLengthInBytes;
     /* Start the transfer */
     SDIO_HOST->MMC_IO = 0x01;
+
     /* Wait for MMC device to be done sending the data */
+    mmc_sdio_driver_blocking_wait_bus_free();
+}
+
+void mmc_sdio_driver_blocking_wait_bus_free(void)
+{
     while (SDIO_HOST->MMC_IO & 0x01);
 }

src/W800_SDK_v1.00.10/app/app_drivers/mmc_sdio/mmc_sdio.h

@@ -23,7 +23,7 @@ void mmc_sdio_driver_periph_init(DMATransferDoneCb_t DMATransferDoneCb, void *ar
  * @param dataLengthInBytes the size in bytes of the data to transfer.
  * Maximum length is 65535 bytes.
  */
-void mmc_sdio_driver_write_dma_async(uint32_t *data, u32 dataLengthInBytes);
+void mmc_sdio_driver_write_dma_async(uint32_t *data, uint32_t dataLengthInBytes);
 
 /**
  * @brief Sends one byte of data to the slave
@@ -43,4 +43,10 @@ void mmc_sdio_driver_write_one(uint8_t data);
  */
 void mmc_sdio_driver_write(const uint8_t *data, uint16_t dataLengthInBytes);
 
+/**
+ * @brief Performs a busy wait until the data bus is free for us to use.
+ * 
+ */
+void mmc_sdio_driver_blocking_wait_bus_free(void);
+
 #endif //MMC_SDIO_H

src/W800_SDK_v1.00.10/app/ble/ble_service.c

@@ -695,7 +695,7 @@ static int ble_gap_event_cb(struct ble_gap_event *event, void *arg)
                 else
                 {
                     TLS_BT_APPL_TRACE_VERBOSE("last data chunk sent, end of the transfer"NEW_LINE);
-                    // All data has been sent, end of the transfer
+                    // All data have been sent, end of the transfer
                     reset_data_being_sent(&notification_data);
                 }
             }
@@ -741,8 +741,7 @@ static int battery_level_char_access_cb(uint16_t conn_handle, uint16_t attr_hand
 
 static int gatt_nus_char_access_cb(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg)
 {
-    TLS_BT_APPL_TRACE_EVENT("gatt_nus_char_access_cb op : %s"NEW_LINE, tls_bt_access_opt_2_str(ctxt->op));
+    //TLS_BT_APPL_TRACE_EVENT("gatt_nus_char_access_cb op : %s"NEW_LINE, tls_bt_access_opt_2_str(ctxt->op));
-    
     switch(ctxt->op)
     {
         case BLE_GATT_ACCESS_OP_WRITE_CHR:

src/W800_SDK_v1.00.10/app/ble/bluetooth_sig_values.h

@@ -2,7 +2,6 @@
 #define BLUETOOTH_SIG_VALUES_H
 
 #define BLE_DEVICE_APPEARANCE (0x00C2) //Smart Watch
-#define BLE_DEVICE_NAME "MDBT42Q_W800SW"
 
 #define BLE_DEVICE_ADV_SERVICE (0x180F) //Battery Service
 

src/W800_SDK_v1.00.10/app/gfx/gfx_task.c

@@ -24,10 +24,11 @@ static void date_time_cb(struct tm * const dateTime)
 {
     if(!dateTime)return;
     tls_get_rtc(dateTime);
-    //APP_LOG_DEBUG("RTC time : %d:%d:%d", dateTime->tm_hour, dateTime->tm_min, dateTime->tm_sec);
 }
 
-static uint8_t _battery_percentage = 100;
+static void _perform_deferred_display_wake_up_set_sleeping(void);
+static void _perform_deferred_display_wake_up_set_timestamp(void);
+static void _perform_deferred_display_wake_up(uint8_t deferred_time_in_ms);
 
 WatchFace_t watchFace;
 MenuScreen_t menuScreen;
@@ -39,17 +40,22 @@ struct bma4_accel_config accel_conf;
 struct bma456w_wrist_wear_wakeup_params setting;
 struct bma4_int_pin_config pin_config;
 
-struct 
+static struct 
 {
     uint16_t int_status;
     bool battery_controller_status;
 } _interrupts_statuses = {.int_status = 0, .battery_controller_status = false};
 
+static struct
+{
+    uint16_t battery_voltage;
+    uint8_t battery_percentage;
+} _battery_stats = {.battery_voltage = 0, .battery_percentage = 100};
 
 /* This call back is automatically called by the watch face when it wants to refresh the battery  */
 static void battery_indicator_cb(uint8_t *levelInPercent, BatteryState_e *batteryState)
 {
-    *levelInPercent = _battery_percentage;
+    *levelInPercent = _battery_stats.battery_percentage;
     *batteryState = watch_peripherals_get_battery_controller_status();
 }
 
@@ -217,7 +223,17 @@ static void setLanguageCb(uint8_t *language, SettingMode_e mode)
     }
 }
 
-static void saveSettingsToFlash(void)
+static void getBLEDeviceNameCb(const char **dev_name)
+{
+    *dev_name = BLE_DEVICE_NAME;
+}
+
+static void getBatteryVoltageCb(uint16_t *battery_voltage)
+{
+    *battery_voltage = _battery_stats.battery_voltage;
+}
+
+static void saveSettingsToFlashCb(void)
 {
     /*if(!persistency_save_settings_to_flash())
     {
@@ -225,7 +241,7 @@ static void saveSettingsToFlash(void)
     }*/
 }
 
-static void performFactoryReset()
+static void performFactoryResetCb()
 {
     // Reload factory settings
     persistency_factory_reset();
@@ -251,8 +267,10 @@ SettingsScreenAPIInterface_t settingsScreenAPIInterface =
     .setBLEEnabledSettingsCb    = &(setBLEEnabledCb),
     .setWiFiEnabledSettingsCb   = &(setWiFiEnabledCb),
     .setLanguageSettingsCb      = &(setLanguageCb),
-    .saveSettingsCb             = &(saveSettingsToFlash),
+    .getBLEDeviceNameCb         = &(getBLEDeviceNameCb),
-    .factoryResetCb             = &(performFactoryReset),
+    .getBatteryVoltageCb        = &(getBatteryVoltageCb),
+    .saveSettingsCb             = &(saveSettingsToFlashCb),
+    .factoryResetCb             = &(performFactoryResetCb),
 };
 
 static uint16_t angle_with_offset(uint16_t angle, uint16_t offset)
@@ -284,6 +302,17 @@ static void delay_us(uint32_t period, void *intf_ptr)
         tls_os_time_delay(pdMS_TO_TICKS(period / 1000));
 }
 
+static void ble_service_nus_data_rx_cb(const uint8_t *data, uint16_t length)
+{
+    for (uint16_t i = 0; i < length; i++)
+    {
+        if (data[i] < 32)
+        printf("[%u]", data[i]);
+        else
+        printf("%c", data[i]);
+    }
+}
+
 static void ble_service_state_change_cb(ble_service_state_e ble_service_state)
 {
     switch(ble_service_state)
@@ -336,6 +365,8 @@ static void scan_result_cb(void)
     tls_mem_free(buffer);
 }
 
+extern LCDConfig_t LCDConfig;
+
 void gfx_task(void *param)
 {
     APP_LOG_TRACE("GFX task starting");
@@ -355,8 +386,8 @@ void gfx_task(void *param)
     watch_peripherals_register_battery_controller_status_change_cb(&(battery_controller_status_on_change_cb));
 
     /* Make the first battery voltage reading here */
-    uint16_t battery_voltage = watch_peripherals_get_battery_voltage(battery_unit_mv);
+    _battery_stats.battery_voltage = watch_peripherals_get_battery_voltage(battery_unit_mv);
-    _battery_percentage = battery_voltage_to_percentage(battery_voltage);
+    _battery_stats.battery_percentage = battery_voltage_to_percentage(_battery_stats.battery_voltage);
 
     /* Check whether the RTC is running or not, if not, then the board was reset
        So we start the RTC */
@@ -392,8 +423,6 @@ void gfx_task(void *param)
     /* Let's init the I2C interface */
     i2c_init(I2C_SDA, I2C_SCL, I2C_CLOCK_SPEED);
 
-    uint8_t aliveCounter = 0;
-
     /* Init the magnetometer */
     if(!QMC5883L_init())
         APP_LOG_INFO("Failed to init QMC5883L");
@@ -499,6 +528,7 @@ void gfx_task(void *param)
         APP_LOG_INFO("BMA456 step cnter feature enable failed");
 
     /* Configure and register BLE stack and services callbacks */
+    ble_service_register_nus_data_rx_cb(&(ble_service_nus_data_rx_cb));
     ble_service_register_state_change_cb(&(ble_service_state_change_cb));
 
     /* Once we are done with the initializing steps we 
@@ -508,9 +538,9 @@ void gfx_task(void *param)
     /* Enable WiFi hotspot scanning for antenna performance test purposes */
     //tls_wifi_scan_result_cb_register(&(scan_result_cb));
 
-    extern LCDConfig_t LCDConfig;
     float temperature = 0;
     float pressure = 0;
+    uint32_t update_tick = 0;
 
     for(;;)
     {
@@ -543,28 +573,27 @@ void gfx_task(void *param)
             APP_LOG_DEBUG("Wrist tilt");
         }
 
-        if(++aliveCounter % 200 == 0)
+        if(lv_tick_elaps(update_tick) > 5000)
         {
             uint32_t steps = 0;
             if(bma456w_step_counter_output(&steps, &bma) != BMA4_OK)
                 APP_LOG_DEBUG("Failed to read step counts");
 
-            watch_face_set_step_count(&watchFace, steps);
+            watch_face_set_step_count_indicator(&watchFace, steps);
 
             pressure = BMP280_get_pressure(&temperature);
             BMP280_trigger_measurement();
-            battery_voltage = watch_peripherals_get_battery_voltage(battery_unit_mv);
+            _battery_stats.battery_voltage = watch_peripherals_get_battery_voltage(battery_unit_mv);
-            _battery_percentage = battery_voltage_to_percentage(battery_voltage);
+            _battery_stats.battery_percentage = battery_voltage_to_percentage(_battery_stats.battery_voltage);
             APP_LOG_DEBUG("GFX thread, temp : %0.2f °C, press : %0.2f hPa, battery(%s) : %u mV <-> %u %%",
                             temperature,
                             pressure/100,
                             battery_controller_status_2_str(watch_peripherals_get_battery_controller_status()),
-                            battery_voltage,
+                            _battery_stats.battery_voltage,
-                            _battery_percentage);
+                            _battery_stats.battery_percentage);
 
             //APP_LOG_DEBUG("Scanning WiFi : %d", tls_wifi_scan());
-            
+            update_tick = lv_tick_get();
-            aliveCounter = 0;
         }
 
         /* Handle inactivity periods : */
@@ -589,9 +618,14 @@ void gfx_task(void *param)
             QMC5883L_set_power_mode(Continuous);
             //lcd_on(&LCDConfig, true);
             lcd_sleep(&LCDConfig, false);
-            watch_peripherals_set_brightness(persistency_get_settings()->display.display_brightness);
+            //watch_peripherals_set_brightness(persistency_get_settings()->display.display_brightness);
+            //lcd_on(&LCDConfig, false);
+            _perform_deferred_display_wake_up_set_timestamp();
         }
 
+        /* Will wake the display up after some ms to avoid seeing the second hand jumping */
+        _perform_deferred_display_wake_up(30);
+
         /* Throttle CPU freq down when inactive to save power or to increase responsiveness */
         tls_sys_clk clk;
         tls_sys_clk_get(&clk);
@@ -617,9 +651,31 @@ void gfx_task(void *param)
         {
             _interrupts_statuses.battery_controller_status = false;
             //Let's refresh the battery percentage as well:
-            battery_voltage = watch_peripherals_get_battery_voltage(battery_unit_mv);
+            _battery_stats.battery_voltage = watch_peripherals_get_battery_voltage(battery_unit_mv);
-            _battery_percentage = battery_voltage_to_percentage(battery_voltage);
+            _battery_stats.battery_percentage = battery_voltage_to_percentage(_battery_stats.battery_voltage);
-            watch_face_set_battery_indicator(&watchFace, _battery_percentage, watch_peripherals_get_battery_controller_status());
+            watch_face_set_battery_indicator(&watchFace, _battery_stats.battery_percentage, watch_peripherals_get_battery_controller_status());
         }
     }
 }
+
+
+
+/* This handling logic should be moved somewhere ! I just don't know where yet ... */
+static uint32_t _ticks = 0;
+static bool _was_sleeping = false;
+
+static void _perform_deferred_display_wake_up_set_timestamp(void)
+{
+    _ticks = lv_tick_get();
+    _was_sleeping = true;
+}
+
+static void _perform_deferred_display_wake_up(uint8_t deferred_time_in_ms)
+{
+    if(_was_sleeping && lv_tick_elaps(_ticks) > deferred_time_in_ms)
+    {
+        _was_sleeping = false;
+        lcd_on(&LCDConfig, true);
+        watch_peripherals_set_brightness(persistency_get_settings()->display.display_brightness);
+    }
+}

src/W800_SDK_v1.00.10/app/gfx/settings_screen.c

@@ -22,6 +22,7 @@ static const char* language_options = "Francais\nDeutsch\nEnglish";
 
 static void _simulate_side_screen_item_click(SettingsScreen_t * const settingsScreen, lv_obj_t *item);
 static void _set_rtc_time_to_label(SettingsScreen_t * const settingsScreen);
+static void _set_battery_voltage_to_label(SettingsScreen_t * const settingsScreen);
 
 static void _settings_screen_update_labels_language(SettingsScreen_t * const settingsScreen)
 {
@@ -232,6 +233,7 @@ static void about_refresh_timer_cb(lv_timer_t *timer)
 {
     SettingsScreen_t *settingsScreen = timer->user_data;
     _set_rtc_time_to_label(settingsScreen);
+    _set_battery_voltage_to_label(settingsScreen);
 }
 
 static lv_obj_t *add_menu_list_item(lv_obj_t *list, const char *text, lv_event_cb_t event_cb, void *user_data)
@@ -479,10 +481,22 @@ static void load_connectivity_side_screen(SettingsScreen_t *settingsScreen)
     lv_label_set_text_static(label, "Bluetooth");
     lv_obj_align_to(label, settingsScreen->ble_switch, LV_ALIGN_OUT_RIGHT_MID, 10, 0);
 
+    label = lv_label_create(settingsScreen->side_screen);
+    lv_label_set_text_static(label, "Device Name :");
+    lv_obj_align_to(label, settingsScreen->ble_switch, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+
+    lv_obj_t *dev_name_label = lv_label_create(settingsScreen->side_screen);
+    const char * ble_dev_name = NULL;
+    if(settingsScreen->settingsScreenAPIInterface.getBLEDeviceNameCb) settingsScreen->settingsScreenAPIInterface.getBLEDeviceNameCb(&ble_dev_name);
+    lv_label_set_text_static(dev_name_label, ble_dev_name);
+    lv_obj_set_style_text_color(dev_name_label, lv_color_make(130, 130, 130), LV_PART_MAIN);
+    lv_obj_align_to(dev_name_label, label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+
     settingsScreen->wifi_switch = lv_switch_create(settingsScreen->side_screen);
-    lv_obj_align_to(settingsScreen->wifi_switch, settingsScreen->ble_switch, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 10);
+    lv_obj_align_to(settingsScreen->wifi_switch, dev_name_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 10);
     if(settingsScreen->settingsScreenAPIInterface.setWiFiEnabledSettingsCb)settingsScreen->settingsScreenAPIInterface.setWiFiEnabledSettingsCb(&toggled, SETTING_MODE_GET);
     if(toggled) lv_obj_add_state(settingsScreen->wifi_switch, LV_STATE_CHECKED);
+    lv_obj_add_state(settingsScreen->wifi_switch, LV_STATE_DISABLED);
     lv_obj_add_event_cb(settingsScreen->wifi_switch, &(activation_switch_cb), LV_EVENT_VALUE_CHANGED, settingsScreen);
 
     label = lv_label_create(settingsScreen->side_screen);
@@ -541,9 +555,18 @@ static void load_about_side_screen(SettingsScreen_t *settingsScreen)
     lv_obj_align_to(settingsScreen->currentTime.current_time_label, rtc_time, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
     _set_rtc_time_to_label(settingsScreen);
 
+    lv_obj_t *battery_label = lv_label_create(settingsScreen->side_screen);
+    lv_label_set_text_static(battery_label, "Battery Voltage :");
+    lv_obj_align_to(battery_label, settingsScreen->currentTime.current_time_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+
+    settingsScreen->batteryVoltage.batteryVoltageLabel = lv_label_create(settingsScreen->side_screen);
+    _set_battery_voltage_to_label(settingsScreen);
+    lv_obj_set_style_text_color(settingsScreen->batteryVoltage.batteryVoltageLabel, lv_color_make(130, 130, 130), LV_PART_MAIN);
+    lv_obj_align_to(settingsScreen->batteryVoltage.batteryVoltageLabel, battery_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+
     label = lv_label_create(settingsScreen->side_screen);
     lv_label_set_text_static(label, "Factory Reset :");
-    lv_obj_align_to(label, settingsScreen->currentTime.current_time_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+    lv_obj_align_to(label, settingsScreen->batteryVoltage.batteryVoltageLabel, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
 
     lv_obj_t *factory_rst_btn = lv_btn_create(settingsScreen->side_screen);
     lv_obj_align_to(factory_rst_btn, label, LV_ALIGN_OUT_BOTTOM_MID, 0, 5);
@@ -720,3 +743,11 @@ static void _set_rtc_time_to_label(SettingsScreen_t * const settingsScreen)
     year+2000);
     lv_label_set_text_static(settingsScreen->currentTime.current_time_label, settingsScreen->currentTime.current_time_text);
 }
+
+static void _set_battery_voltage_to_label(SettingsScreen_t * const settingsScreen)
+{
+    uint16_t voltage = 0;
+    if(settingsScreen->settingsScreenAPIInterface.getBatteryVoltageCb) settingsScreen->settingsScreenAPIInterface.getBatteryVoltageCb(&voltage);
+    sprintf(settingsScreen->batteryVoltage.batteryVoltageText, "%u mV", voltage);
+    lv_label_set_text_static(settingsScreen->batteryVoltage.batteryVoltageLabel, settingsScreen->batteryVoltage.batteryVoltageText);
+}

src/W800_SDK_v1.00.10/app/gfx/settings_screen.h

@@ -21,6 +21,8 @@ typedef struct SettingsScreenAPIInterface
     void (*setBLEEnabledSettingsCb)(bool *enabled, SettingMode_e mode);
     void (*setWiFiEnabledSettingsCb)(bool *enabled, SettingMode_e mode);
     void (*setLanguageSettingsCb)(uint8_t *language, SettingMode_e mode);
+    void (*getBLEDeviceNameCb)(const char **dev_name);
+    void (*getBatteryVoltageCb)(uint16_t *battery_voltage);
     void (*saveSettingsCb)(void);
     void (*factoryResetCb)(void);
 } SettingsScreenAPIInterface_t;
@@ -38,6 +40,7 @@ typedef struct SettingsScreen
 
     lv_obj_t *side_screen;
 
+    /* Menu widgets */
     lv_obj_t *hour_roller;
     lv_obj_t *minute_roller;
     lv_obj_t *second_roller;
@@ -56,6 +59,12 @@ typedef struct SettingsScreen
         char current_time_text[20];
     } currentTime;
 
+    struct
+    {
+        lv_obj_t *batteryVoltageLabel;
+        char batteryVoltageText[8];
+    } batteryVoltage;
+    
     /* Main screen */
     lv_obj_t *display;
 

src/W800_SDK_v1.00.10/app/gfx/watch_face.c

@@ -469,7 +469,7 @@ void watch_face_set_bluetooth_indicator(WatchFace_t * const watchFace, Bluetooth
     _set_bluetooth_indicator(watchFace);
 }
 
-void watch_face_set_step_count(WatchFace_t * const watchFace, uint32_t step_count)
+void watch_face_set_step_count_indicator(WatchFace_t * const watchFace, uint32_t step_count)
 {
     if(!watchFace)
     {
@@ -524,3 +524,14 @@ void watch_face_force_sync(WatchFace_t *const watchFace)
 
     update_watch_hands_angles(watchFace, 0);
 }
+
+bool watch_face_is_in_use(WatchFace_t * const watchFace)
+{
+    if(!watchFace)
+    {
+        LV_LOG_ERROR("NULL pointer given !");
+        return false;
+    }
+
+    return watchFace->display != NULL;
+}

src/W800_SDK_v1.00.10/app/gfx/watch_face.h

@@ -125,7 +125,13 @@ void watch_face_set_battery_indicator(WatchFace_t * const watchFace, uint8_t lev
  */
 void watch_face_set_bluetooth_indicator(WatchFace_t * const watchFace, BluetoothState_e bluetoothState);
 
-void watch_face_set_step_count(WatchFace_t * const watchFace, uint32_t step_count);
+/**
+ * @brief Shows the current step count passed as parameter on the watch face.
+ * 
+ * @param watchFace a pointer to the watch face context structure.
+ * @param step_count the step count to show on the watch face.
+ */
+void watch_face_set_step_count_indicator(WatchFace_t * const watchFace, uint32_t step_count);
 
 /**
  * @brief Forces the watch face to sync up with the RTC by calling the provided date_time_cb
@@ -134,6 +140,15 @@ void watch_face_set_step_count(WatchFace_t * const watchFace, uint32_t step_coun
  */
 void watch_face_force_sync(WatchFace_t * const watchFace);
 
+/**
+ * @brief Returns true if the watch face screen is currently being used and displayed.
+ * 
+ * @param watchFace a pointer to the watch face context structure.
+ * @return true if the watch face screen is being used 
+ * @return false if the watch face screen is not being used/displayed currently
+ */
+bool watch_face_is_in_use(WatchFace_t * const watchFace);
+
 /**
  * @brief Frees all resources used by the WatchFace object
  * 

src/W800_SDK_v1.00.10/src/bt/blehost/porting/w800/include/syscfg/syscfg.h

@@ -425,7 +425,7 @@
 
 /*** @apache-mynewt-nimble/nimble/host */
 #ifndef MYNEWT_VAL_BLE_ATT_PREFERRED_MTU
-#define MYNEWT_VAL_BLE_ATT_PREFERRED_MTU (512)
+#define MYNEWT_VAL_BLE_ATT_PREFERRED_MTU (256) // 512
 #endif
 
 #ifndef MYNEWT_VAL_BLE_ATT_SVR_FIND_INFO

src/lvgl_win_sim/lv_port_win_codeblocks/altimeter_screen.c

@@ -183,7 +183,7 @@ static void apply_altitude_event_cb(lv_event_t *e)
 {
     AltimeterScreen_t *altimeterScreen = e->user_data;
 
-    uint32_t spinbox_value = lv_spinbox_get_value(altimeterScreen->altitudeOffset_spinbox);
+    int32_t spinbox_value = lv_spinbox_get_value(altimeterScreen->altitudeOffset_spinbox);
 
     destroy_altitude_setting_content(altimeterScreen);
     //Show the main value

src/lvgl_win_sim/lv_port_win_codeblocks/settings_screen.c

@@ -356,14 +356,14 @@ static void load_connectivity_side_screen(SettingsScreen_t *settingsScreen)
     lv_obj_align_to(label, ble_switch, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
 
     lv_obj_t *dev_name_label = lv_label_create(settingsScreen->side_screen);
-    lv_label_set_text_static(dev_name_label, "W800SW");
+    lv_label_set_text_static(dev_name_label, NULL/*"W800SW"*/);
     lv_obj_set_style_text_color(dev_name_label, lv_color_make(130, 130, 130), LV_PART_MAIN);
     lv_obj_align_to(dev_name_label, label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
 
 
     lv_obj_t *wifi_switch = lv_switch_create(settingsScreen->side_screen);
     lv_obj_align_to(wifi_switch, dev_name_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 10);
-
+    lv_obj_add_state(wifi_switch, LV_STATE_DISABLED);
     label = lv_label_create(settingsScreen->side_screen);
     lv_label_set_text_static(label, "WiFi");
     lv_obj_align_to(label, wifi_switch, LV_ALIGN_OUT_RIGHT_MID, 10, 0);
@@ -417,9 +417,18 @@ static void load_about_side_screen(SettingsScreen_t *settingsScreen)
     lv_obj_set_style_text_color(settingsScreen->currentTime.current_time_label, lv_color_make(130, 130, 130), LV_PART_MAIN);
     lv_obj_align_to(settingsScreen->currentTime.current_time_label, rtc_time, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
 
+    lv_obj_t *battery_label = lv_label_create(settingsScreen->side_screen);
+    lv_label_set_text_static(battery_label, "Battery Voltage :");
+    lv_obj_align_to(battery_label, settingsScreen->currentTime.current_time_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+
+    lv_obj_t *battery_voltage = lv_label_create(settingsScreen->side_screen);
+    lv_label_set_text_static(battery_voltage, "4277 mV");
+    lv_obj_set_style_text_color(battery_voltage, lv_color_make(130, 130, 130), LV_PART_MAIN);
+    lv_obj_align_to(battery_voltage, battery_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+
     label = lv_label_create(settingsScreen->side_screen);
     lv_label_set_text_static(label, "Factory Reset :");
-    lv_obj_align_to(label, settingsScreen->currentTime.current_time_label, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
+    lv_obj_align_to(label, battery_voltage, LV_ALIGN_OUT_BOTTOM_LEFT, 0, 5);
 
     lv_obj_t *factory_rst_btn = lv_btn_create(settingsScreen->side_screen);
     lv_obj_align_to(factory_rst_btn, label, LV_ALIGN_OUT_BOTTOM_MID, 0, 5);

src/lvgl_win_sim/lv_port_win_codeblocks/watch_face.c

@@ -180,7 +180,18 @@ static void hide_hour_and_minutes_hand_cb(lv_event_t *e)
 {
     WatchFace_t *watchFace = e->user_data;
 
-    if(lv_obj_has_flag(watchFace->hourHand.handImg, LV_OBJ_FLAG_HIDDEN))
+    if(255 == lv_obj_get_style_opa(watchFace->hourHand.handImg, LV_PART_MAIN))
+    {
+        lv_obj_set_style_opa(watchFace->hourHand.handImg, 120, LV_PART_MAIN);
+        lv_obj_set_style_opa(watchFace->minuteHand.handImg, 120, LV_PART_MAIN);
+    }
+    else
+    {
+        lv_obj_set_style_opa(watchFace->hourHand.handImg, 255, LV_PART_MAIN);
+        lv_obj_set_style_opa(watchFace->minuteHand.handImg, 255, LV_PART_MAIN);
+    }
+
+    /*if(lv_obj_has_flag(watchFace->hourHand.handImg, LV_OBJ_FLAG_HIDDEN))
     {
         lv_obj_clear_flag(watchFace->hourHand.handImg, LV_OBJ_FLAG_HIDDEN);
         lv_obj_clear_flag(watchFace->minuteHand.handImg, LV_OBJ_FLAG_HIDDEN);
@@ -189,7 +200,7 @@ static void hide_hour_and_minutes_hand_cb(lv_event_t *e)
     {
         lv_obj_add_flag(watchFace->hourHand.handImg, LV_OBJ_FLAG_HIDDEN);
         lv_obj_add_flag(watchFace->minuteHand.handImg, LV_OBJ_FLAG_HIDDEN);
-    }
+    }*/
 }
 
 void watch_face_init(WatchFace_t * const watchFace)