diff --git a/README.md b/README.md
index bda6436..57ca33c 100644
--- a/README.md
+++ b/README.md
@@ -1,3 +1,41 @@
 # ESP8266_swiss_army_board
 
-Arduino based project running on my custom made board
\ No newline at end of file
+Arduino based project running on my custom made board
+
+## The hardware :
+
+**The board :**
+![](http://88.167.116.148/images/git/SAB_front.png)
+![](http://88.167.116.148/images/git/SAB_back.png)
+
+**The modules :**
+![](http://88.167.116.148/images/git/SAB_cmp_mod.png)
+
+## Here is a list of the components needed in order to build such a board :
+* 1x 1N4001 reverse voltage protection diode
+* 1x AMS1117 5v voltage regulator
+* 1x AMS1117 3.3v voltage regulator
+* 2x 22µf electrolytic capacitors
+* 2x 0.1µf (code 104) tantalum capacitors
+* 1x jumper
+* 1x 2 pins male header
+* 1x On/Off switch
+* 2x push buttons
+* 1x ESP8266 E12
+* 1x 19 pins female header
+* 1x 2 screws terminal
+* 1x micro USB socket
+* 1x 100 ohm resistor
+* 2x 1k ohm resistor
+* 1x 6.8k ohm resistor
+* 1x 3.9k ohm resistor
+* 1x 22k ohm resistor
+* 2x 10k ohm resistor
+* 1x 33k ohm resistor
+* 1x 4.7k ohm resistor
+* 1x 7cmx5cm pcb
+
+## The software
+
+### The librairies used :
+* 
\ No newline at end of file