README.md

@@ -69,8 +69,6 @@ Set **RADIO_NODE_ADDRESS** to change it's 5 byte address if you feel like it. **
 
 Set **RADIO_PA_LEVEL** to adjust the transmit power level if needed (higher the power, higher the current consumption)
 
-Set **ENABLE_LNA** to true or false to enable or disable the Low Noise Amplifier on the NRF modules if it has one.
-
 ## The hardware :
 Here is a list of the parts used to build the station with a link to where you can buy it :
 * [Solar panel : 72x72](https://fr.aliexpress.com/item/4001240640418.html?spm=a2g0s.9042311.0.0.27426c3741mIVH)

src/app/WSPeripherals.cpp

@@ -113,9 +113,9 @@ void WSPeripherals::_3V3PowerRail(State state)
 
 const RF24 &WSPeripherals::getRadio(){return _NRF;}
 
-void WSPeripherals::applyRadioConfig(uint8_t channel, uint8_t paLevel, bool enableLNA, rf24_datarate_e datarate)
+void WSPeripherals::applyRadioConfig(uint8_t channel, uint8_t paLevel, rf24_datarate_e datarate)
 {
   _NRF.setChannel(channel);
-  _NRF.setPALevel(paLevel, enableLNA);
+  _NRF.setPALevel(paLevel);
   _NRF.setDataRate(datarate);
 }

src/app/WSPeripherals.h

@@ -44,7 +44,7 @@ class WSPeripherals
     /*
      * Before calling this method, externalPeripherals(ON) and initExternalPeripherals() must be called respectively
      */
-    void applyRadioConfig(uint8_t channel = RADIO_CHANNEL, uint8_t paLevel = RADIO_PA_LEVEL, bool enableLNA = ENABLE_LNA, rf24_datarate_e datarate = RADIO_DATARATE);
+    void applyRadioConfig(uint8_t channel = RADIO_CHANNEL, uint8_t paLevel = RADIO_PA_LEVEL, rf24_datarate_e datarate = RADIO_DATARATE);
     const RF24 &getRadio();
     
   protected:

src/app/definition.h

@@ -22,11 +22,9 @@
 #define RADIO_CHANNEL 108
 #define RADIO_NODE_ADDRESS "WEST1" //Weather Station 1
 #define RADIO_PA_LEVEL RF24_PA_LOW //RF24_PA_MIN,RF24_PA_LOW,RF24_PA_HIGH,RF24_PA_MAX
-#define ENABLE_LNA false //true or false
 #define RADIO_DATARATE RF24_250KBPS
 
-//Sleep config part : in 4 second increments ie : 1 corresponds to 4s of sleep, and 15 correponds to 60 seconds of sleep.
-//Max is 255 * 4s.
+//Sleep config part : in 4 second increments ie : 1 corresponds to 4s of sleep, and 15 correponds to 60 seconds of sleep. 
 #define SLEEP_4_SEC_INTERVAL 15
 
 //Pin config part